A³ Mix

Features:

• Standalone OSC controller

• Input vu meter per channel

• 8 Output vu meters

• Tape-in section for multichannel or stereo to direct (discrete, decoder, stereomap) mixbus <- wip

Part Name and functions

[1] TRIM CONTROL

• Adjust the level of audio signals input in each channel

• [TRIM]: -inf dB to 0 dB

[2] EQ HIGH

• [HIGH]: -inf dB to 0 dB (24 kHz)

[3] EQ MID

• [MID]: -inf dB to 0 dB (1 kHz)

[4] EQ LOW

• [LOW]: -inf dB to 0 dB (20 Hz)

[5] INPUT VU METER

• Displays the sound level of the respective channels before passing through the channel faders

[6] CUE BUTTON

• Presses the [CUE] button(s) for the channel(s) you want to monitor

[7] CHANNEL FADER

• Adjust the level of audio signals output in each channel

• [FADER]: -inf dB to o dB

[8] FILTER FX SWITCH

• Pressing the [FX] switch turns on the VCF filter for this channel

• The indicator lights if filter FX is on.

[9] 3D SWITCH

• Pressing the [3D] switch enables 3d encoding for this channel

• The indicator lights if 3D is on

[10] FILTER FREQUENCY

• Sets the cut off frequency of the VCF filter

[11] FILTER RESONANCE CONTROL

• Change the “Q” or sharpness of the VCF filter

[12] FILTER TYPE SELECT HI-PASS

• [HPF]: Allows signals above the cutoff frequency to pass

[13] FILTER TYPE SELECT LOW-PASS

• [LPF]: Allows signals below the cutoff frequency to pass

[14] HEADPHONE LEVEL

• Sets the level of the headphone output

[15] CUE/MIX CONTROL

• Turn left (CUE) to hear the activated channel Cue.

• If no channel Cue is activated the Mix output will be heared WIP

• Turn right (Mix) to hear the Mix output

• In the centre position the Cue signal and the main mix are summed together

[16] BOOTH OUTPUT LEVEL

• Sets the audio signal level for predefined monitor outputs

• [BOOTH]: -inf dB to 0 dB

[17] MASTER OUTPUT LEVEL

• Sets the audio signal level for predefined public address outputs

• [MASTER]: -inf dB to 0 dB

[18] DISPLAY <- wip

• shows bpm for master and per input channel

[19] OUTPUT VU METER

• Displays the audio level output from 8 predefined channels

Front

PHONES OUTPUT TERMINAL

• Connect headphones here

• 6.3mm stereo phone plug

Back

PHONES INPUT TERMINAL

• Connect predefined Cue outputs here

• 2x female XLR Sockets

ETHERNET SOCKET

• Connect ethernet cable to PoE switch here

A³ Mix Specification

• PoE to USB 5V Adapter

• PoE cost 24W max

• Raspberry Pi 3 Model B

• Teensy 4.1

• A³ Mix PCB V0.2

Network and PoE

• When a plan calls for multiple devices to be connected to one PoE/PoE+ switch, it’s necessary to ensure the total wattage required by the devices do not exceed the maximum wattage of the switch

• This device powers up as soon as the PoE powersupply is connected

Box Contents

• A³ Motion

• Network cable

• Quickstart Guide

• Safety & Warranty Manual

Misc

• Items not listed under Box Contents are sold separately